Jazzmaster® "Original" set (neck + bridge)

€123.14

Pre-CBS specs for a more "organic" sound. Heavy formvar 42 AWG wire and alnico 5 magnets.

Quantity

  • Pago seguro Pago seguro
  • Envío certificado Envío certificado
  • Devolución disponible Devolución disponible
PayPal

Pickup set (neck and bridge) of the" Jazzmaster® Original " model, hand wound by Jess Loureiro.

These pickups have single coil format and are made with the same materials and characteristics as those mounted on the pre-CBS era Jazzmasters®. The pickups are potted in the right mix of beeswax-paraffin, which prevents the microphonic problems without reducing richness of sound. The coils are made from black "forbon" and they have vintage cloth-wire like the originals. They are wound by hand with 42 AWG Heavy Formvar wire, that gives a sound richer in harmonics and with a lot of "quak". The Alnico 5 magnets have been "calibrated" and charged one by one by hand, as they did in the 50´s. The neck pickup is RW/RP to get the "hum-cancelling" in the middle position. The set have a compensated output being 8,4k for the neck and 9,2 for the bridge.

Potted in beeswax-paraffin mix

Neck pickup RW/RP (hum-cancelling in the middle position)

Output: 8.4 k (neck) / 9.2 k (bridge)

Wire: 42 AWG Heavy Formvar

Magnets: "calibrated" Alnico 5

USA pole spacing

 

You can contact me at jl@jlguitars.com


97 Items

Specific References

related products

Typi non habent claritatem insitam est usus legentis in iis qui facit eorum claritatem.

16 other products in the same category:

Broadcaster set

€99.00

Early Tele® sound, very rich in harmonics but with enouhgh "punch". This set will give to your Tele® a vintage 50's flavour, with thick bass and crystalline highs. 8,5 Kohm for the bridge an 7,0 Kohm for the neck. Alnico 3 and 43 awg heavy formvar in both pickups.

In stock, shipping in 24/48 hours

back to top