Jazzmaster® "Jazz" set (neck + bridge)

€123.14

Incredible clean sounds, dense bass and crystalline highs. Heavy formvar 42 AWG wire and alnico 3 magnets.

Quantity

  • Pago seguro Pago seguro
  • Envío certificado Envío certificado
  • Devolución disponible Devolución disponible
PayPal

Pickup set (neck and bridge) of the" Jazzmaster® Jazz" model, hand wound by Jess Loureiro.

These pickups have single coil format and are made with the same materials and characteristics as those mounted on the pre-CBS era Jazzmasters®. The pickups are potted in the right mix of beeswax-paraffin, which prevents the microphonic problems without reducing richness of sound. The coils are made from black "forbon" and they have vintage cloth-wire like the originals. They are wound by hand with 42 AWG Heavy Formvar wire, that gives a sound richer in harmonics and with a lot of "quak". The Alnico 3 magnets have been "calibrated" and charged one by one by hand, as they did in the 50´s. The neck pickup is RW/RP to get the "hum-cancelling" in the middle position. The set have a compensated output being 7,9k for the neck and 8,8 for the bridge.

Potted in beeswax-paraffin mix

Neck pickup RW/RP (hum-cancelling in the middle position)

Output: 7.9 k (neck) / 8.8 k (bridge)

Wire: 42 AWG Heavy Formvar

Magnets: "calibrated" Alnico 3

USA pole spacing

You can contact me at jl@jlguitars.com


99 Items

Specific References

related products

Typi non habent claritatem insitam est usus legentis in iis qui facit eorum claritatem.

16 other products in the same category:

back to top